LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - 2.3L ECOBOOST (231KW/314PS)) >> Removal And Installation >> Engine Mount Control Solenoid >> Removal

Engine Mount Control Solenoid: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the electrical, and the vacuum hose connectors. Remove the retainer and the engine mount control solenoid.

    Torque

    : 97 lb.in (11 Nm)

GFD287249Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals