LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Charging System (Battery, Battery Mounting And Battery Cables)) >> Removal And Installation >> Battery Tray >> Removal

Battery Tray: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner. For 2.0L refer to: Air Cleaner . For 2.7L, refer to: Air Cleaner . Ford 3.5L, refer to: Air Cleaner .
  2. Remove the battery. Refer to: Battery .
  3. Disconnect the battery cable and engine wire harness retainers from the battery tray.
    GFD282621Courtesy of FORD MOTOR COMPANY
    1. Remove the M6 x 18mm bolts.

      Torque: 53 lb.in (6 Nm)

    2. Remove the M6 x 30mm bolts and the battery tray.

      Torque: 53 lb.in (6 Nm)

GFD282622Courtesy of FORD MOTOR COMPANY