LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Parking Aid - Vehicles With: Active Park Assist) >> Removal And Installation >> Rear Active Park Assist Sensors >> Removal

Rear Active Park Assist Sensors: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bumper cover. Refer to: Rear Bumper Cover .
  2. Remove the rear active park assist sensor.

    1. Disconnect the rear active park assist electrical connector.
    2. Release the retaining tabs.
    3. Remove the rear active park assist sensor.

GFD282584Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals