Pinpoint Test G : DTC (Diagnostic Trouble Code) B13F3:96, DTC (Diagnostic Trouble Code) B13F4:96: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13F3:96 | Left Rear Side Sensor: Component Internal Failure | A continuous and on-demand DTC that sets in the PAM when the left rear active park assist sensor has internally failed or has an incorrect attenuation time. |
| B13F4:96 | Right Rear Side Sensor: Component Internal Failure | A continuous and on-demand DTC that sets in the PAM when the right rear active park assist sensor has internally failed or has an incorrect attenuation time. |
Possible Causes
- Rear active park assist sensor
- PAM (integral to the BCM)
NOTE:
Before disconnecting any of the active park assist sensors, verify the connectors are properly seated and latched.