LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Parking Aid - Vehicles With: Parking Aid Camera) >> Removal And Installation >> Front Parking Aid Camera >> Removal

Front Parking Aid Camera: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper cover. Refer to: Front Bumper Cover .
  2. Disconnect the front parking aid camera electrical connector.
    GFD282566Courtesy of FORD MOTOR COMPANY
  3. Remove the screws and the front parking aid camera bracket.
    GFD282567Courtesy of FORD MOTOR COMPANY
  4. Remove the front parking aid camera.
GFD282568Courtesy of FORD MOTOR COMPANY