Pinpoint Test K : The Camera System Does Not Respond When The Front Parking Aid Camera View Switch Is Pressed: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
Possible Causes
- Communication network concern
- TR input concern
- Vehicle speed input concern
- Front parking aid camera view switch (integral to the FCIM)
- FCIM
- IPMB
Visual Inspection and Diagnostic Pre-Checks
- Inspect the front parking aid camera view switch to verify that the switch is not damaged or stuck in the pressed position.
- Perform an APIM reset and reevaluate the concern prior to following this pinpoint test. REFER to: Bezel Diagnostics - Vehicles With: Touchscreen Display . REFER to: Bezel Diagnostics - Vehicles With: Sony Audio System .