LIN Communication
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The BCM and the rear parking aid camera communicate via a LIN circuit which is a dedicated single wire communication network.
The messages sent from the BCM to the camera are:
- Camera configuration data
- Display manual zoom request
- Guideline on/off request
- Trailer connection status (if equipped with trailer tow)
- Steering angle
- Standby enable/disable request
The messages sent from the camera to the BCM are:
- Camera status
- Display zoom status
- Camera part number data
- Guideline status