LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Parking Aid - Vehicles With: Rear Parking Aid) >> Removal And Installation >> Front Parking Aid Sensor >> Removal

Front Parking Aid Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure can be used for all locations of the component.
  1. Remove the front bumper cover. Refer to: Front Bumper Cover .
  2. Remove the front parking aid sensor.

    1. Disconnect the front parking aid sensor electrical connector.
    2. Release the tabs.
    3. Remove the front parking aid sensor.

GFD282559Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals