Pinpoint Test P : U0140:00: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The PAM communicates with the BCM through the HS-CAN1. REFER to: Parking Aid - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | A continuous and on-demand DTC that sets when the messages received from the BCM are missing for 5 seconds or more. |
Possible Sources
- Communication concern
- BCM
- PAM (integral to the BCM)