LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Climate Control System - General Information (2 Of 2)) >> Removal And Installation >> Receiver Drier Element - 2.7L EcoBoost (238kW/324PS) >> Installation

Receiver Drier Element - 2.7L EcoBoost (238kW/324PS): Installation

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to: Refrigerant Oil Adding .
scientia non olet · About LEMON Manuals