Condenser Outlet Line - 2.0L EcoBoost (184kW/250PS) - MI4: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Recover the refrigerant. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging .
- Remove the front bumper cover. Refer to: Front Bumper Cover .
- Remove the condenser outlet line nut and the disconnect the fitting.
Torque: 80 lb.in (9 Nm)
-
NOTE: Make sure that all openings are sealed.
Remove the condenser outlet line nut, disconnect the fitting and remove the condenser outlet line.
Torque: 80 lb.in (9 Nm)