LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Climate Control System - General Information (1 Of 2)) >> Diagnosis And Testing >> Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC) >> Pinpoint Test(s) >> Pinpoint Test H : The A/C (Air Conditioning) Is Always On - A/C (Air Conditioning) Mode Always Commanded On >> Notes

Pinpoint Test H : The A/C (Air Conditioning) Is Always On - A/C (Air Conditioning) Mode Always Commanded On: Notes

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Automatic Climate Control System for schematic and connector information.

Normal Operation and Fault Conditions 

Control System Logic REFER to: Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC) - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
P1464 A/C Demand Out Of Self Test Range This DTC sets when the PCM senses an A/C request during a PCM self-test.

Possible Sources