LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (FUEL TANK AND FUEL LINES - 3.5L DURATEC (212kW/278PS)) >> Removal And Installation >> Fuel Level Sender >> Removal

Fuel Level Sender: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Diagnostic Methods .

  2. Remove the Fuel Pump and Sender Unit. Refer to: Fuel Pump and Sender Unit .
    • Disconnect the electrical connector.

    • Release the locking tab and remove the Fuel Level Sender.

GFD282319Courtesy of FORD MOTOR COMPANY