Muffler and Tailpipe: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Clean all exhaust connections before reassembly.
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
- Remove the LH and RH exhaust flexible pipes. Refer to: Exhaust Flexible Pipe .
- Detach the exhaust isolators and remove the muffler and tailpipe.