LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Transfer Case - 3.5L DURATEC (212KW/278PS)) >> Removal And Installation >> Intermediate Shaft Seal >> Notes

Intermediate Shaft Seal: Notes

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Special Tool(s) / General Equipment 

GFD281898Courtesy of FORD MOTOR COMPANY
205-241 (T86P-3514-A) Remover, Halfshaft T86P-1000-S TKIT-2009TC-F TKIT-1986-F
GFD281900Courtesy of FORD MOTOR COMPANY
205-883 Installer, PTU Linkshaft Seal TKIT-2007FA-FLM
GFD281988Courtesy of FORD MOTOR COMPANY
205-907 Handle, 32 Driver TKIT-2008DH-FLM
GFD281905Courtesy of FORD MOTOR COMPANY
308-125 Remover, Transfer Case Bearing TKIT-1987-LM TKIT-1987-FLM
GFD281906Courtesy of FORD MOTOR COMPANY
308-221 (T94P-7025-BH) Installer, Shaft Bearing Cup TKIT-1994-LMH/MH2 TKIT-1994-FH/FMH/FLMH
Slide Hammer
Cable Ties

Materials 

Name Specification
Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound XG-3-A ESE-M1C171-A