LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Transfer Case - 2.7L ECOBOOST (238KW/324PS)) >> General Procedures >> Transfer Case Draining and Filling >> Draining

Transfer Case Draining and Filling: Draining

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. If equipped, remove the underbody shield.
    GFD278975Courtesy of FORD MOTOR COMPANY
  3. Remove the PTU drain plug.
    GFD281847Courtesy of FORD MOTOR COMPANY
  4. Install the PTU drain plug.

    Torque: 33 lb.ft (45 Nm)

GFD281847Courtesy of FORD MOTOR COMPANY