Intermediate Shaft Seal: Installation

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The seal is correctly installed if it is flush with the transfer case cover.

Using the special tools, install a new intermediate shaft seal. Use Special Service Tool: 307-256 (T92P-77000-FH) Installer, Differential Fluid Seal., 205-907 Handle, 32 Driver.

Courtesy of FORD MOTOR COMPANY
Install the RH halfshaft. Refer to: Front Halfshaft RH - 2.0L EcoBoost (184kW/250PS) - MI4, All-Wheel Drive (AWD) .