LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Automatic Transmission External Controls) >> Removal And Installation >> Brake Shift Interlock Actuator >> Removal

Brake Shift Interlock Actuator: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Brake Shift Interlock Actuator (BSIA) is not serviced individually. If installation of a new BSIA is required, install a new floor shift selector lever assembly.
  1. Remove the selector lever assembly. Refer to: Selector Lever Assembly .
scientia non olet · About LEMON Manuals