Transmission Fluid Warmer: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the battery tray. Refer to: Battery Tray .
-
NOTE: 2.7L GTDI.NOTE: Be prepared to collect escaping fluid.
Install the tools and disconnect the coolant hose quick-connect couplings from the transmission fluid warmer. Use the General Equipment: Hose Clamp(s)
-
NOTE: 3.5L TiVCT.NOTE: Be prepared to collect escaping fluid.
Install the tools, release the clamp and disconnect the coolant hose and the coolant hose quick-connect coupling from the transmission fluid warmer. Use the General Equipment: Hose Clamp(s)
-
NOTE: Be prepared to collect escaping fluid.
Remove and discard the transmission fluid tube bolt and studbolts. Remove the transmission-to-warmer tube and disconnect the warmer-to-bypass valve tube.
- If necessary, remove the backing rings and band seals from the transmission and the transmission fluid warmer.
- Remove the bolts and the transmission fluid warmer.