LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Automatic Transmission - 6-Speed Automatic Transmission - 6F50/6F55 (2 Of 2)) >> Removal And Installation >> Output Shaft Speed (OSS) Sensor >> Removal

Output Shaft Speed (OSS) Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the main control valve body. Refer to: Main Control Valve Body .
  2. Remove the bolt and the OSS sensor.

    Torque

    : 106 lb.in (12 Nm)

GFD281197Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals