LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Electronic Engine Controls - 3.5L DURATEC (212KW/278PS)) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Installation

Camshaft Position (CMP) Sensor: Installation

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before installation, lubricate the CMP sensor O-ring seal with clean engine oil.
  1. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals