Turbocharger Bypass Valve: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
-
- Remove the oil filler cap.
- Remove the nut and bolt and remove the engine appearance cover.
Torque: 42 lb.in (4.8 Nm)
- Disconnect the turbocharger bypass valve electrical connector, and remove harness from mounting stud.
- Remove the retainers and the turbocharger bypass valve.
Torque: 62 lb.in (7 Nm)