LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (ELECTRONIC ENGINE CONTROLS - 2.7L ECOBOOST (238kW324PS)) >> Removal And Installation >> Knock Sensor (KS) >> Removal

Knock Sensor (KS): Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the coolant outlet connector. Refer to: Coolant Outlet Connector .
  2. NOTE: Note the position of the components before removal.

    Disconnect the ECT sensor connector, remove retainers and the KS.

    Torque: 97 lb.in (11 Nm)

GFD280331Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals