LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (ELECTRONIC ENGINE CONTROLS - 2.7L ECOBOOST (238kW324PS)) >> Removal And Installation >> Intake Air Temperature (IAT) Sensor >> Removal

Intake Air Temperature (IAT) Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the IAT electrical connector.
    GFD280329Courtesy of FORD MOTOR COMPANY
  2. Remove the IAT sensor.
GFD280330Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals