LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (ELECTRONIC ENGINE CONTROLS - 2.7L ECOBOOST (238kW324PS)) >> Removal And Installation >> Crankshaft Position (CKP) Sensor >> Installation

Crankshaft Position (CKP) Sensor: Installation

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure using a diagnostic scan tool. Use the General Equipment: Ford Diagnostic Equipment
scientia non olet · About LEMON Manuals