LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (ELECTRONIC ENGINE CONTROLS - 2.0L ECOBOOST (184kW/250PS) - MI4) >> Removal And Installation >> Variable Camshaft Timing (VCT) Oil Control Solenoid >> Removal

Variable Camshaft Timing (VCT) Oil Control Solenoid: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the valve cover. Refer to: Valve Cover .
  2. Remove the bolts and the VCT oil control solenoids.

    Torque: 89 lb.in (10 Nm)

GFD277846Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals