LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (EVAPORATIVE EMISSIONS - 2.0L ECOBOOST (184kW/250PS) - MI4) >> Removal And Installation >> Fuel Tank Pressure Sensor and Tube >> Removal

Fuel Tank Pressure Sensor and Tube: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. Remove the fuel tank. Refer to: Fuel Tank .
    1. Disconnect the quick release coupling, detach the fuel tank pressure sensor and tube from the fuel tank and remove. Refer to: Quick Release Coupling .
GFD280225Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals