Pinpoint Test A : Loss Of Coolant: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
The engine cooling system is a closed system providing for coolant expansion and contraction as well as changes in pressure as coolant warms and cools with engine operation. Various gaskets, seals, hoses and clamps contain coolant within the cooling system and keep other fluids and contaminants from entering the cooling system.
Possible Sources
- Coolant hoses or tubes
- Hose clamps
- Thermostat housing
- Thermostat housing O-ring seals
- Oil cooler (may leak internally or externally)
- Coolant pump gasket
- Radiator
- Pressure relief cap
- Coolant pump (leaking from engine block weep hole)
- Heater core
- Engine gaskets (may leak internally or externally)
- Transmission fluid warmer (may leak internally or externally)
- Degas bottle
- Cylinder block core plugs
- Cylinder head core plugs
- Block heater (if equipped)