LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (ENGINE - 3.5L DURATEC (212kW/278PS)) >> Removal And Installation >> Crankshaft Front Seal >> Notes

Crankshaft Front Seal: Notes

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM Color Coding

Special Tool(s) / General Equipment 

GFD278996Courtesy of FORD MOTOR COMPANY
303-102 Installer, Crankshaft Pulley
GFD278997Courtesy of FORD MOTOR COMPANY
303-1251 Installer, Front Seal TKIT-2006UF-FLM TKIT-2006UF-ROW
GFD278778Courtesy of FORD MOTOR COMPANY
303-335 (T88T-6701-A) Installer, Front Cover Oil Seal TKIT-1988-FLM TKIT-1988-F
GFD278586Courtesy of FORD MOTOR COMPANY
303-409 (T92C-6700-CH) Remover, Crankshaft Seal TKIT-1992-FH/FMH/FLMH TKIT-1993-LMH/MH
Strap Wrench
Trolley Jack
Puller
Wooden Block

Materials 

Name Specification
Motorcraft® SAE 5W-20 Synthetic Blend Motor Oil XO-5W20-QSP WSS-M2C945-A