LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (ENGINE - 2.7L ECOBOOST (238kW/324PS)) >> Removal And Installation >> Engine Front Cover >> Notes

Engine Front Cover: Notes

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM Color Coding

Special Tool(s) / General Equipment 

GFD278202Courtesy of FORD MOTOR COMPANY
303-1531 Installer, Front Crank Seal and Damper
GFD278204Courtesy of FORD MOTOR COMPANY
303-335 (T88T-6701-A) Installer, Front Cover Oil Seal TKIT-1988-FLM TKIT-1988-F
GFD278205Courtesy of FORD MOTOR COMPANY
303-409 (T92C-6700-CH) Remover, Crankshaft Seal TKIT-1992-FH/FMH/FLMH TKIT-1993-LMH/MH
Three Leg Puller
Plastic Scraper
Trolley Jack
Vehicle/Axle Stands
Cable Ties
Hose Clamp Remover/Installer
Flat-Bladed Screwdriver
Wooden Block

Materials 

Name Specification
Motorcraft® High Performance Engine RTV Silicone TA-357 WSE-M4G323-A6
Engine Oil - SAE 5W-30 - Synthetic Blend Motor Oil XO-5W30-Q1SP WSS-M2C946-B1
Motorcraft® Orange Concentrated Antifreeze/Coolant VC-3-B WSS-M97B44-D