LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Steering Wheel And Column Electrical Components) >> Diagnosis And Testing >> Steering Wheel and Column Electrical Components >> Pinpoint Tests >> Pinpoint Test H : U0100:00 >> Notes

Pinpoint Test H : U0100:00: Notes

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Normal Operation and Fault Conditions 

The HSWM communicates with the PCM over the CAN through the GWM. If the HSWM does not receive messages from the PCM, no noticeable symptom may be present.

HSWM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0100:00 Lost Communication With ECM/PCM "A": No Sub Type Information Sets when the HSWM does not receive an expected message from the PCM for more than 5 seconds.

Possible Causes