LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Steering Wheel And Column Electrical Components) >> Description And Operation >> Steering Wheel and Column Electrical Components - System Operation and Component Description >> Component Description >> Steering Effort Control Module (SECM) (vehicles equipped with active steering)

Steering Effort Control Module (SECM) (vehicles equipped with active steering)

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The SECM controls the steering wheel heating elements. The SECM uses the steering wheel temperature sensor to maintain the steering wheel temperature. The SECM is designed to remain on, heating the steering wheel and maintaining temperature until switched off using the FDIM or the ignition is turned off.

The SECM cannot be serviced independently. It is only replaced as an assembly with the steering wheel.

The SECM requires PMI when replaced.

scientia non olet · About LEMON Manuals