LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Steering Column) >> Removal And Installation >> Steering Wheel - Vehicles With: Adaptive Steering >> Installation

Steering Wheel - Vehicles With: Adaptive Steering: Installation

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step only necessary when installing new component.

    Using a diagnostic scan tool, complete the PMI process for the SECM following the on-screen instructions and INSTALL as-built data from PTS for the SASM, following the diagnostic scan tool instructions under Module Programming>As-Built.

  3. NOTE: This step only necessary when installing new component.

    Using a diagnostic scan tool, complete the following service routines in the order shown, following the on-screen instructions.

    1. Steering Wheel Angle Trim.
    2. Steering Motor Angle Trim.

  4. Check and if necessary adjust front toe. Refer to: Front Toe Adjustment - Vehicles With: Active Steering .
scientia non olet · About LEMON Manuals