LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Power Brake Actuation) >> Removal And Installation >> Brake Vacuum Pump - 2.0L EcoBoost (184kW/250PS) - MI4 >> Installation

Brake Vacuum Pump - 2.0L EcoBoost (184kW/250PS) - MI4: Installation

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the gasket and install a new gasket as necessary.
    GFD277341Courtesy of FORD MOTOR COMPANY
  2. NOTE: Manually align the brake vacuum pump drive key with the camshaft slot before installation.

    To install, reverse the removal procedure.