Front Stabilizer Bar: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

Remove the front subframe. Refer to: Front Subframe .
Remove and discard the front stabilizer bar bracket bolts and the front stabilizer bar.

Courtesy of FORD MOTOR COMPANY