LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (ENGINE - 2.0L ECOBOOST (184kW/250PS) - MI4) >> Removal And Installation >> Variable Camshaft Timing (VCT) Unit >> Installation

Variable Camshaft Timing (VCT) Unit: Installation

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Do not tighten the bolts at this time. The bolts will be tightened during the timing chain installation procedure.

    Install the VCT units and the bolts.

    GFD277676Courtesy of FORD MOTOR COMPANY
  2. Install the timing chain. Refer to: Timing Chain .
scientia non olet · About LEMON Manuals