LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (ENGINE - 2.0L ECOBOOST (184kW/250PS) - MI4) >> Removal And Installation >> Engine Front Cover >> Notes

Engine Front Cover: Notes

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM Color Coding

Special Tool(s) / General Equipment 

303-096 (T74P-6150-A) Installer, Camshaft Front Oil Seal TKIT-2009TC-F
GFD277488Courtesy of FORD MOTOR COMPANY
303-1521 Alignment Tool, Crankshaft Position Sensor TKIT-2010C-FLM
GFD277548Courtesy of FORD MOTOR COMPANY
303-1565 Alignment Tool, Camshaft TKIT-2010C-FLM
GFD277490Courtesy of FORD MOTOR COMPANY
303-1689 Holding Tool, Crank Damper
GFD277491Courtesy of FORD MOTOR COMPANY
303-409 (T92C-6700-CH) Remover, Crankshaft Seal TKIT-1992-FH/FMH/FLMH TKIT-1993-LMH/MH
GFD277492Courtesy of FORD MOTOR COMPANY
303-507 Timing Peg, Crankshaft TDC TKIT-2001N-FLM TKIT-2001N-ROW

Materials 

Name Specification
Motorcraft® High Performance Engine RTV Silicone TA-357 WSE-M4G323-A6
Motorcraft® Gasket Maker TA-16 WSK-M2G348-A5
Engine Oil - SAE 5W-30 - Synthetic Blend Motor Oil XO-5W30-Q1SP WSS-M2C946-B1
Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound XG-3-A ESE-M1C171-A