Rear Seatbelt Buckle LH - Vehicles With: Inflatable Seatbelts: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Depower the SRS. Refer to: Supplemental Restraint System (SRS) Depowering .
- Remove the rear seat cushion. Refer to: Rear Seat Cushion .
- Disconnect the seatbelt buckle electrical connector.
-
NOTE: Support the seatbelt inflator to prevent the inflator from twisting during the removal or installation of the seatbelt buckle bolt. Failure to follow this instruction may result in damage to the seatbelt inflator.
Remove the seatbelt buckle.
- Position the rear center seatbelt aside to access the seatbelt buckle bolt.
- Remove the bolt.
Torque: 30 lb.ft (40 Nm)
- Remove the seatbelt buckle.