Rear Outer Seatbelt Upper Retractor - Vehicles With: Inflatable Seatbelts: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH shown, RH similar.
- Remove the load space trim panel. Refer to: Loadspace Trim Panel .
- Release the clips and remove the D-ring bolt cover.
- Remove the D-ring bolt and position the seatbelt aside.
Torque: 30 lb.ft (40 Nm)
- Remove the bolt and the seatbelt retractor.
Torque: 30 lb.ft (40 Nm)