Rear Outer Seatbelt Inflator LH - Vehicles With: Inflatable Seatbelts: Removal

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Remove the LH rear safety belt buckle. Refer to: Rear Seatbelt Buckle LH - Vehicles With: Inflatable Seatbelts .
Remove the seatbelt inflator.
1. Disconnect the electrical connector.
2. Remove the seatbelt inflator bracket bolt.
  Torque: 31 lb.in (3.5 Nm)
3. Remove the seatbelt inflator.

Courtesy of FORD MOTOR COMPANY