Lower Safety Belt Retractor (Lap Belt)
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The lap belt has a web loop at its end with a steel bushing in the center of the loop. The lap belt connects to the shoulder belt by sliding a pin through two ears on the shoulder belt tongue and the steel bushing on the lap belt. The pin locks into place with a spring clip that is part of the shoulder belt tongue. A plastic cover is fitted over the connection to protect the pin and to keep foreign objects out.
The lap belt retractor has both the Automatic Locking Retractor (ALR) and the Emergency Locking Retractor (ELR) features.