LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (SEATBELT Systems) >> Description And Operation >> Seatbelt Systems - System Operation and Component Description >> Component Description >> Child Safety Seat Tether Anchor

Child Safety Seat Tether Anchor

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Child safety seat tether anchors are the wires located at the back of the rear seat backrest frame at all rear seating positions.

If a child safety seat was in use during a collision, inspect the child safety seat tether anchor and mounting areas and restore the vehicle to the original production configuration. Refer to: Seatbelt Procedure After a Collision .