Rear Door Window Control Switch: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH side shown, RH side similar.
- Remove the rear door window control switch.
- Remove the rear door window control switch and the bezel assembly.
- Disconnect the rear door window control switch electrical connector.
-
NOTE: This step is only necessary when installing a new component.
Remove the rear door window control switch.
- Release the retaining tabs from the rear door window control switch.
- Remove the rear door window control switch from the bezel.