Rear Door Glass Top Run: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH side shown, RH side similar.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the rear door window glass. Refer to: Rear Door Window Glass .
- Remove the rear door upper moulding. Refer to: Rear Door Upper Moulding .
- Remove the inner belt moulding.
- Remove the rear door glass top run.
- Position aside the top run upper corners and remove the retainers.
Torque
: 9 lb.in (1 Nm)
- Remove the rear door glass top run.
- Position aside the top run upper corners and remove the retainers.