Rear Seat Cushion: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Release the rear seat cushion front locking tabs.
- Release the rear seat cushion.
- Raise the front of the cushion.
- Push the cushion rearward until the cushion frame clears the attaching hooks.
-
NOTE: Outboard recliner handle and side shield removed for clarity.
Disconnect the electrical connector and remove the rear seat cushion.