Rear Seat Cushion Cover: Removal
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear seat cushion. Refer to: Rear Seat Cushion .
- Release the rear seat cushion cover J-clips.
- Remove the cushion cover and foam from the seat frame.
- Lift the seat cushion cover and foam.
- If equipped. Disconnect the heated seat electrical connectors.
- Invert the rear seat cushion cover.
-
NOTE: Use care when separating the seat cushion trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the seat cushion foam pad.NOTE: Use care when separating the seat cushion trim cover from the hook-and-arrow strips or the hook-and-arrow strips may be torn from the seat cushion foam pad.
On both sides. Disengage the hook-and-loop and hook-and-arrow strips and remove the rear seat cushion trim cover.