LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2018 >> Mustang GT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Body Closures) >> Description And Operation >> Body Closures - System Operation and Component Description >> Network Message Chart

Network Message Chart

WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

RGTM Network Input Messages 

Broadcast Message Originating Module Message Purpose
Liftgate request BCM Used by the RGTM to open/close the liftgate when the BCM receives a valid request from a programmed RKE transmitter or the passive entry feature.
Gear lever position PCM Used by the RGTM to inhibit power liftgate operation if the transmission is not in PARK.
Power liftgate mode command IPC Used by the RGTM to enable/disable the power liftgate operation.
Vehicle lock status BCM Used by the RGTM to inhibit the power liftgate operation when the liftgate release switch is activated, unless the doors have been previously unlocked electronically.

IPC Network Input Messages 

Broadcast Message Originating Module Message Purpose
Power liftgate chime request RGTM Used by the IPC to sound the power liftgate chime.
scientia non olet · About LEMON Manuals