Pinpoint Test J : DTC (Diagnostic Trouble Code) U0200:00: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The SODR communicates with the PDM through the MS-CAN.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0200:00 | Lost Communication with Gateway "A": No Sub Type Information | A continuous memory DTC that sets in the SODR when expected messages from the PDM are missing for 2 seconds or more. |
Possible Causes
- Communication network concern
- PDM concern
- PDM