Pinpoint Test B : The Reversing Lamps Are On Continuously: Notes
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Reversing Lamps for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Exterior Lighting - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1277:15 | Reverse Lamp: Circuit Short To Battery or Open | A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the reversing lamps output circuit. |
Possible Sources
- Wiring, terminals or connectors
- Gear range input
- BCM