Pinpoint Test BG : The Hill Start Assist Warning Message Is Always Displayed

BG1 CHECK THE MESSAGE CENTER OPERATION
- Ignition ON.
- Close all doors, the hood and luggage compartment lid.
- Clear all message center warnings by pressing the OK button for each warning present.
- Monitor the door ajar RTT.
- Open the driver door.
- Clear the message center popup warning.
- Monitor the door ajar RTT.
Is the door ajar RTT off with the door closed, and on with the door open?

Yes GO to BG2

No Refer to IPC Guided Routine Testing .

BG2 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST
- Using a diagnostic scan tool, perform the IPC self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?

Yes REFER to DTC Chart: Instrument Panel Cluster (IPC) .

No GO to BG3

BG3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?

Yes REFER to: Communications Network .

No DIAGNOSE the hill start assist feature. REFER to: Anti-Lock Brake System (ABS) And Stability Control .